> Hi, all,
>
> I am replacing one of the motors on the 120 on our 470 and will need to
> re-initialize the EPROM and re-enter the pump calibration numbers. And,
> lo and behold, of course, we have mis-placed them! (they should be neatly
> printed on the motors, but aren't). Does anyone out there know how to or
> rather is there a way to determine what values were entered into the
> EPROM before we wipe it out to re-initialize. Obviously, I'll have the
> new pump calibration code off of the new motor for the B pump, but the
> OLD A pump motor, now that's another issue.
>
> Hope your summer is going well,
> Deb McMillen
> Institute of Molecular Biology
> University of Oregon
> Eugene OR 97403
>
Deb,
To display the E2 memory: input .2698 FLOW to give %Pressure.
Then pressing ENTER each time should give A vol,B vol and % Power.
At least that's how it works on my 120A.Give it a shot,I hope it works.
Regards,
Sandy.
----------------------
Alex Carne,
Head of Protein Characterization,
Institute of Cancer Research,
Chester Beatty Labs.,
237 Fulham Road,
London SW3 6JB, UK.
Tel: +44(0)171 878 3815 (Office)
Tel: +44(0)171 970 6003 (Lab)
Tel: +44 (0)171 352 8133 #5136 (Mailbox)
Fax: +44 (0)171 352 3299
E-mail: sandyc@icr.ac.uk
Mobile: 0370 365 032